Publicité
Les langues disponibles
Les langues disponibles
Information on your Cleankeys keyboard
Cleankeys keyboards are high-quality devices with
a user interface made of glass. The development
and production work takes place in Germany
under stringent quality conditions. These operating
instructions will help you put the keyboard into use
without any problems, operate it safely and maintain
it properly.
System requirements
The PC system, to which you connect your Cleankeys
keyboard, must include the following:
1.
A USB port 1.0, 1.1 or 2.0 compatible
2.
Operating system with standard USB-HID-
Support
Putting the unit into operation
Connect the USB cable on the keyboard to a free
USB port. The LED status bar lights up to indicate
that the initialisation process is taking place. This
procedure normally* takes two seconds and ends
when all the LEDs are illuminated (going from 1
to 8) and the driver initialization is confirmed by
the operating system. After this, the keyboard is
registered on your computer as an HID unit. You can
now use the keyboard without any problems. If the
keyboard remains connected to the PC, it is initialized
automatically each time that the computer is booted.
* Longer initialisation times may occur, depending on the
operating system in use
4
www.gett-group.com
www.cleankeys.com
Publicité
