Cabinet Cleaning - Sony SDT-S9000 Mode D'emploi

When the Humidity sensor indicator is on
Abnormal occurrences

Cabinet cleaning

The drive contains a humidity sensor, which causes the BUSY indicator to
blink when the humidity inside the case is too high (see page 10). If this
occurs, reduce the humidity in the room with a dehumidifier or air
conditioner, or by other means.
If the drive behaves abnormally, or if it begins to smell or smoke,
immediately unplug it from the wall outlet and contact your supplier for
assistance.
Wipe the cabinet with a soft dry cloth. For heavy dirt, wipe with a soft cloth
moistened with a gentle liquid soap, then wipe again with a soft dry cloth. Do
not use alcohol, paint thinner, bug sprays or other volatile solvents, as they
can damage the finish.
*1
With the SDT-S5000/S5200/S4000E/S2000E.
*1
Part 4. Care and Maintenance
19