Systembuild Evolution 3464013COM Instructions De Montage page 18

STEP 13
MPORTANT: THIS UNIT
THESE INSTRUCTIONS
PRODUCT.
OPTION 1: Attachment
wall stud (preferred method)
Using a stud finder, locate a stud
in the wall. Place your unit
against the wall aligned in this
location.
To make driving the screw
easier, you can drill a 1/8"
diameter pilot hole (3mm) into
the stud.
Drive the screw (10) through the
hole of back panel into the wall
stud.
OPTION 2: Attachment
drywall
Locate your unit where desired
against a wall then move your
unit aside.
Drill a 3/16" diameter hole (5mm)
into the wallboard. Tap the wall
anchor (9) into the hole until it is
flush.
Move your unit into location and
fasten it to the wall anchor (9)
with the screw (10).
ameriwoodhome.com
MUST BE SECURE
TO INSTALL THE
Into a
Q)
Into
TO THE WALL TO HELP
ANTI-TIPPING SAFETY
18
systembuild
PREVENT TIPOVER.
BRACKET PROVIDED
Serious or fatal crushing
Injuries can occur from
furnlture tipover.
Ell
To prevent tipover:
* Install tipover restraint
provided
* place heaviest items in the
lowest
* Unless specifically
designed to
accomodate,
or other heavy objects on the
top of this product
* Never
climb
hang on drawers, door, or
shelves
Use of tipover
may only reduce,
ellmlnate the rlsk of tipover
EVOLUTION
FOLLOW
WITH THIS
WARNING
shelves
do not set TVs
allow children to
or
restarints
but not
For Masonry, Concrete, or
other wall materials:
Consult your local hardware
store for appropriate
anchors to securely attach the
safety bracket.
You
Tube