Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Operating Instructions
SETTING THE TIME
Display will flash until clock has been set.
1. The time "12:00" will start flashing when the unit is first
plugged into the outlet.
2. Press and hold (at least 2 seconds) the TIME/MEMORY button
to enter the time adjustment mode during clock mode, and
the time "HH:MM" will flash on the display.
3. Press the HOUR/TUNE– button to increase the hour display.
Release when desired hour is showing. Press the MIN/
TUNE+ button to increase the minute display. Release when
desired minutes are showing. Wait 4 seconds (4 flashes) or
press the TIME/MEMORY button to confirm the set time.
NOTE: Once the time stops flashing, repeat Steps 2 and 3 to
reset the time.
PLAYING THE RADIO
1. Plug the power cord into a standard 120VAC electrical outlet.
2. Press the RADIO ON/OFF button to switch to the radio mode.
3. Press the AM/FM button to select the AM or FM feature.
4. Press the AL SET/
volume level.
5. Press the HOUR/TUNE– and/or MIN/TUNE+ buttons to
adjust the AM/FM frequencies manually with the intervals
10KHz/0.1MHz. Or, press and hold (at least 2 seconds) the
HOUR/TUNE– and MIN/TUNE+ buttons to search and stay on
the next radio station automatically.
6. To turn off the radio, just press the RADIO ON/OFF button
once more to switch to clock mode.
and AL OFF/
buttons to adjust the
8
Publicité
Table des Matières
