Princess SMART Mode D'emploi page 8

Instruction manual
Pair your heater to Princess Home app
• Make sure your heater is powered.
• Open the Princess Home app.
• Select your country code, enter the cell phone number and tap
"Get" to get a message containing the verification code.
• Enter the verification code in the message and tap "Log in" to log
in to the App.
• Click "Add Device" to add a new device.
• Select the device you wanted to connect.
• Follow the instructions on the app to connect the heater.
• To control your device with voice using a smart speaker please
refer to the manufacturer's instructions on how to enable a skill
through your device.
Technical Specification
Details
Voltage
Frequency
Power (maximum)
IP Code
8
348200/348201
220-240V~
50-60Hz
2000W
IP24
CLEANING AND MAINTENANCE
• Before cleaning, unplug the appliance and wait for the appliance
to cool down.
• Clean the appliance with a damp cloth. Never use harsh and
abrasive cleaners, scouring pad or steel wool, which damages the
device.
• Clean the two air outlets (above and below) by using a vacuum
cleaner to remove dust from inside.
DECLARATION OF CONFORMITY
• Hereby, Smartwares Europe declares that the radio equipment
type 01.342000.04.001/01.342001.04.001 are in compliance with
Directive 2014/53/EU
• The full text of the EU declaration of conformity is available at the
following internet address: www.princesshome.eu/doc
GUARANTEE
• This product is guaranteed for 24 months granted. Your warranty
is valid if the product is used in accordance to the instructions and
for the purpose for which it was created. In addition, the original
purchase (invoice, sales slip or receipt) is to be submitted with the
date of purchase, the name of the retailer and the item number of
the product.