Napoleon Fireplaces GI-RB3/4 Instructions D'installation

GI-RB3/4
Hardware Included:
Ref. Qty. Description
2 9-14 x 1/2
1
1 Bend up the 2 tabs on each riser rail,
as shown below.
2 Using 2 screws (supplied), secure
the riser rails to the hearth using the
specified holes for your model
Remove the 2 existing screws (1 per
3
side) from the appliance. Lower the
appliance onto the riser assemb y,
and then reinstall the 2 screws
Riser
Tabs
Wolf Steel Ltd., 24 Napoleon Rd., Barrie, ON L4M OG8Canada
Riser Kit
screws
Existing Screw
Hearth
Rails
Installation Instructions
note:
When the appliance is placed onto the
riser assembly, try to maintain a 1/4" space
rear face of the side of the appliance.
The flashing trim should sit flush with the
back edge of the hearth.
Rear Face
• 1(866)820-8686
Flashing
Trim
GDlX4 Illustrated
the back edge Of the hearth and
GDI/G/X3
GDIX4
Quality
Isa
9001
W415-1857
• www.napoleonfireplaces.com
System Certified 'o
:2015
/ 08 02 18