Ashley T481-2 Feuille D'instructions

THE
ASSEMBLY INSTRUC ION SHEE
IMPORAN SAFETYNOTICE:READCAREFULLY BEFOREBECINNINCASSEMBLY!
* Always use proper tools.
• Follow the assembly steps in order.
* Carefully review the list Of parts.
from which you purchased the product
DO NOT USE SUBSTITUTE PARTS.
* Periodically check to ensure that all connectors
* Keep the instructions for future reference.
* Some assembly may involve attaching
handling the glass or mirrors, as severe injury
mirror breaks. Never handle large pieces of glass or mirrors
NOTE: ASHLEY FURNITURE
FAILURE O PROPERLY
CHECK TO SEE THAT THE FOLLOWINC PARTS ARE IN THE HARDWARE PACK!
NO
A SCREWDRIVER IS
NEEDED FOR
ASSEMBLY
*NOT INCLUDED*
D
Side
Leg Assembly
2
Base Assembly
c
Table Top
O Ashley Furniture
WORLD CLASS
Do not skip any steps.
If parts are missing, contact the retailer
to obtain any missing parts.
(bolts, screws, etc.) are tight.
glass or mirrors. Be very careful
may result if the glass or
by yourself.
INDUSTRIES, INC. DISCLAIMS
FOLLOW ASSEMBLY INSTRUCTIONS,
Q'TY
DRAWING DESCRIPTION
8 4"x40mm Allen
4" Lock Washer
8
4" Flat Washer
8
16"x80mm
6 5
NOTE: UNIT SHOULD BE ASSEMBLED BY TWO OR MORE PEOPLE.
DO NOT TIGHTENANY BOLTS UNTIL ALL BOLTS
E
Center
Stretcher
Leg
O
O
O
Industries, Inc.,
FURNITURE COMPANY
FOR
* When assembling products that have electric cords (lamps, lights, etc.),
always (l) make sure the electrical cord is unplugged before assembly and (2)
be careful not to twist the electrical
* When assembling shelves
shelves in order to assemble
* Do not stand on tables,
tables, and dinner tables,
person.
* Where assembly instructions
do not attempt assembly
ANY LIABILITY FOR DAMAGES OR INJURIES
PROPER Y ASSEMBLE HE PRODUC
NO DRAWING
Bolt
Bolt
HAVE BEEN STARTED!
on a smooth
2. AFgn each
corresponding
corner
D
3.
clockwise
as
4.
the
E
shown.
5.
clockwise
st
6.
Leg the
shaped
each
I. Attach
top
washer
each
2. Tighten
wrench
3. Carefully
August, 2008. All Rights
O
-2
cord during assembly.
or entertainment centers, do not stand
upper shelves—use a step ladder.
including but not limited to, end tables,
as tables are not meant to support
state that assembly requires two or more
by yourself as there is a risk of injury.
WHICH MAY OCCUR DUE TO
, OR PROPERLY USE THE PRODUCT.
Q'TY
DESCRIPTION
6
Sha ed Washer
5 16" Nut
6
Box Wrench
Place the table top upside
and protective
leg with the
corner. Each
are labeled with a
Use screwdriver to turn
into the holes
shown.
Fasten the side stretchers
legs by turning shaped
and nut F onto each bolt
Use screwdriver to turn
into the holes
etchers as shown.
Fasten the center stretcher
leg assemblies by turning
washers E and nuts
bot as shown.
base assembly
by turning an Allen bolt
B and flat washer
hole as shown.
all nuts with the
C and all bolts with
set the table
Reserved.
O
on lower
coffee
the weight Of a
people,
down
surface.
leg and
number.
bolts D
in the legs
to
washer
as
bolts D
in the
to
F onto
to table
A, lock
C into
box
the
upright.