LENCO HBC-200 Mode D'emploi page 9

5. Use Siri
If the headset is connected to an apple IOS device, you can use the Siri virtual
assistant.
Make sure that Siri is enabled on your IOS smart device (Iphone/Ipad).
To use Siri: Short press the
When you hear the Siri beep, you can speak.
Please Note that Siri can only be used on Apple IOS systems.
Charging the battery (Fig. 5)
To charge the headphone's internal battery, connect it to a wall charger or PC. Use
the the supplied Micro-USB cable, connect the Micro USB connection (5) on the HBC-
200/BCH-1000 and connect the other end to the Wall charger/pc. The LED color is
red when charging and it turns to solid blue when the battery is fully charged.
Note:
1. Please charge the headphone with a 5VDC USB charger or computer's USB
port.
2. It is recommended to fully charge the battery before first use.
3. Do not remove or replace the battery as it will damage the headphone and
will void the warranty.
Wearing the Headphone
As shown in Fig.2, place the headphone around your neck with the speakers
touching your frontal earbones. Don't place the speakers onto your ears like a
normal headphone.
⑦ Place against your frontal earbones
⑧ Place the upper curve over your ear shells
⑨ Place at your nape
button (2) on the HBC-200/BCH-1000 to start Siri.
9