LENCO HBC-200 Mode D'emploi page 8

How to set up HBC-200/BCH-1000
1. Pairing
When you pair the Bluetooth headphone for the first time (and the HBC-200/BCH-
1000 is off), press and hold the key (2) for 5 seconds and release it when you
hear "Power on, Enter pairing". The led light flashes red and blue when in pairing
mode
2. Connecting
Enter the Bluetooth settings on your phone, scan for new Bluetooth devices and
select "HBC-200/BCH-1000". When the connection is made, you will hear a
'connection successful' message on the HBC-200/BCH-1000. If the connection
attempt has failed, please repeat the above.
3. Reconnecting
To power on the HBC-200/BCH-1000 press and hold the (2) key for 3 seconds and
release it when you hear the "Power on" message. The headphone will be re-
connected in a few seconds. (This only works when it has been paired with a device
before)
4. Disconnect and pair with another device
Turn of the HBC-200/BCH-1000
Hold the key (2) for more than 3 seconds, the headphone will enter the pairing
mode. You will hear "Power on, Enter pairing". Select "HBC-200/BCH-1000" in the list
of found Bluetooth devices and the headphone will be paired in a few seconds.
8