Safety Instructions; Risk Of Electric Shock - SilverCrest SWC 300 A1 Mode D'emploi

Safety instructions

RISK OF ELECTRIC SHOCK

Connect the appliance only to mains power
►
sockets supplying a mains power voltage of
220 - 240 V ~ / 50 Hz.
GB
To avoid risks, arrange for defective plugs and/or
►
power cables to be replaced at once by qualifi ed
technicians or our Customer Service Department.
In the event of operating malfunctions, and be-
►
fore cleaning the appliance, disconnect the plug
from the mains power socket.
To disconnect the power cable, always pull the plug
►
from the socket, do not pull the power cable itself.
Do not crimp or crush the power cable and lay
►
it in such a way as to prevent anyone from step-
ping on or tripping over it.
Ensure that the power cable does not become
►
wet or moist during use. Place it such that it can-
not be crushed or damaged.
Should the appliance become damaged, to avoid
►
personal risks discontinue the use of it immediately.
Do not wrap the power cable around the appli-
►
ance and protect it from being damaged.
To enable you to disconnect the appliance
►
quickly in the event of an emergency, do not use
extension cables.
NEVER grasp the appliance, the power cable or
►
the plug with wet hands.
28
SWC 300 A1