Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
the working conditions and the work to be performed. Use of the power tool for operations
different from those
intended could result in a hazardous situation.
5)
Service
•
Have your power tool serviced by a qualified repair person using only identical
replacement parts. This will ensure that the safety of the power tool is maintained.
PRODUCT DESCRIPTION
Read all safety warnings and instructions. Failure to follow the warnings and
instructions may result in electric shock, fire, and/or other serious injury.
.
INTENDED USE
This product is designed for engraving metal, glass and ceramics. It is intended for indoor use
only. Do not use it outdoors. Contact with moisture, e.g. in bathrooms, must be avoided under
all circumstances. For safety and approval purposes (CE), you must not rebuild and/or modify
this product. If you use the product for purposes other than those described above, the product
may be damaged. In addition, improper use can cause hazards such as short circuiting, fire,
electric shock etc.
TECHNICAL SPECIFICATIONS
ITEMNUMBER
Model number
Voltage
Max. diameter
No-load speed (RPM)
Protection class
Vibration level
Acoustic pressure
Cable length
Charger input
Charger output
008051
Q0M-DC-3B
12V
3.25 MM
12000 RPM
II
Less than 2.5m/s
Less than 70dB(s)
2 MTR
230-240V ~ 50Hz
12V 400mA
10
Publicité
Table des Matières
