PoolMaster 72794 Instructions De Montage page 2

Step 1
Thread Net on PVC Hoop.
O Thisisthe net rightout ofthe package.
You will be working with the longer looped end.
@This isaclose-up of the circledportionon diagramI.
This is one loop.
Fold the loop toward you, creating two loops.
O Insertyour finger through the two loops.
Releasethe thumb holding the loop in place and pull
on the two middle strings. The loop should slide up
and catch your fingers.
Take the loop from your finger and slide onto the
basketball hoop. Continue this process with each
loop until all loops are on the hoop.
Backboard
Hoop
Bracket
Step 3
NOTE: ALL HOLES
OF BASE.
• Insert Game Base Fitting (B) up through the bottom of the Base
with hole in Fitting (B) facing the front of Base.(Note: A rubber
mallet may be necessary to drive the fitting into the base).
• Insert Game Base Fitting (A), over Fitting (B) and into the
Game Basewith the holes aligned and facing the front.
Secure Base Fitting (A) to Base with (4) 10-24 5/8" Screws.
POOLMASTER
Note: Visit poolmaster.com,
Bolts (2)
IN FITTINGS MUST FACE FRONT
O
search 72794 for net video instructions.
step 2
• Attach the Hoop to the Backboard by
inserting (2) 2 h" Bolts through the Hoop
Bracket, Hoop and Backboard as pictured
and secure with Washers and Hex Nuts.
10--24 5/8" screws (4)
Game Base
Fitting A
Game Base C
with Cap
Game Base
Fitting B
FRONT
poolmaster.com