Seal Shield SSKSV207 Guide D'installation Rapide page 5

Recommended Cleaning Protocols
Your SEAL SHIELD™ Washable Keyboard or mouse is the first defense in infection control. Following the suggested
cleaning protocols can help reduce the risk of infection.
1) Use Hospital Grade Disinfectant Sprays (Best Practice!)
2) Use Disinfectant Wipes.
3) Hand wash with soap and warm water
4) Machine Wash in Dishwasher
The SEAL SHIELD™ keyboard or mouse is designed to work with
virtually all medical grade, commercial grade, antibacterial, antiviral
and antifungal sprays to kill most known surface contaminants in-
cluding SARS, Influenza, Staph and MRSA. Testing confirms that this
is the most effective cleaning protocol for hospitals. Thoroughly
spray all surface areas and between keys. Use as directed. Wipe
away excess moisture prior to use. There is no need to unplug
your keyboard or power down your computer.
Alcohol based disinfectant wipes are the fastest and easiest way to
disinfect your SEAL SHIELD™ keyboard or mouse.
Thoroughly wipe all surface area with disinfectant wipes. There is
no need to unplug your keyboard or power down your computer.
Your SEAL SHIELD™ keyboard or mouse is washable and fully
submersible.
1) Unplug keyboard or mouse from Quick-Connect cable.
2) Plug keyboard or mouse USB connector in to the included SEAL
CAP™ (Patent Pending). Insure a tight connection to prevent
water intrusion.
3) Soak in warm water using dish soap or other cleaning agent.
Vigorously wash and rinse keyboard in order to insure thorough
cleaning.
4) Shake dry. Wipe away excess surface moisture.
5) Unplug SEAL CAP™ from USB connector. Be sure to wipe all
excess moisture from USB connector prior to plugging into the
Quick-Connect Cable.
7) Reconnect keyboard or mouse to Quick-Connect cable.
Your SEAL SHIELD™ Medical Grade Washable Keyboard or mouse
is designed to be washed in a dishwasher using standard automatic
dishwasher detergent.
1) Unplug keyboard or mouse from Quick-Connect cable.
2) Plug keyboard or mouse USB connector into the included SEAL
CAP™ to insure a tight connection to prevent water intrusion.
3) Place keyboard or mouse on top rack of dishwasher. Wash in
dishwasher using dishwasher detergent and standard wash cycle.
Disable "Heated Drying."
4) Remove from dishwasher. Shake dry. Wipe away excess surface
moisture.
5) Unplug SEAL CAP™ from USB connector. Be sure to wipe all
excess moisture from USB connector prior to plugging into Quick-
Connect cable.
6) Reconnect keyboard or mouse to Quick-Connect cable.