MPM MOD-71 Manuel De L'utilisateur page 48

EN
5. Periodically clean the rotating electric brush roller. You can remove the roller after releasing the
top transparent cover, then use a flathead screwdriver to bend the left side of the roller away from
the housing and remove the roller for cleaning. After cleaning the roller, place it back in the electric
brush and put on the transparent housing (fig. 9).
Fig. 9
CAUTION! Proper and regular cleaning ensures safety of use and extends the life of the
appliance.
TROUBLESHOOTING
PROBLEM
The vacuum cleaner is not
working
Low suction power
The rotating electric brush
roller is no longer operable.
48
CAUSE
Battery discharged
Charging process in progress
Clogged pipe or brush
Dust container full
Dirty dust filters
Blocked electric brush roller
SOLUTION
Charge the battery
Wait until the charging
process is completed
Remove the cause of clogging
Empty the dust container
Clean the filters
Clean/unblock the electric
brush roller