Work Both Areas At The Same Time; End Of Program; Power On/Pause; Double Cooking - Create Air Fryer Dual Stack Manuel D'instructions

WO RK BO TH AREAS AT T H E SAME T I M E
1. Press the power button , then press the zone one button
tion you want for that zone.
• You can adjust the time and temperature freely using the buttons
• You can also press any icon of the preset programs to cook different foods.
2. After setting the function
• You can adjust the time and temperature freely using the buttons
• You can also press any icon of the preset programs to cook different foods.
3. After setting the above program, press the button
• Each function will have its own default time and temperature.
• You can adjust the time and temperature freely using the buttons.
perature and time.
P OWE R ON/PAUSE
• After selecting the program you want to use, set the correct time and temperature, press
the button , it will start flashing, after a beep sounds, the machine will start working.
• During the operation of the machine, if you want to pause cooking, press the button , after
hearing a beep the machine will pause and stop working. The button
• During the operation of the fryer, if you press the button , it will beep and stop working,
returning to standby mode.
Note:
• During operation of the fryer you can remove the cooking basket. The machine will stop
working and you can check the cooking result or add more food if you wish.
• Once the basket is inserted into the drawer correctly, the machine will continue working
in the previously configured program.
E N D OF P ROG R AM
• Once the working time has ended, the fryer will stop heating, the display will show 00 min.
and some beeps will sound.
• The motor will continue to run for one minute after the cooking time is up, then it will go
into standby mode.
D OUB LE COOK ING
If you want to configure the same cooking in both zones, follow the following steps:
1. Place food in both areas.
2. Set the parameters or program you want to use.
3. Press the double cook button
in zone 2.
4. Then press the button
ENGLISH
10
, Press the button
and the values set in the zone will be automatically set
and the fryer will start to work.
and select the cooking func-
and select the desired cooking function.
for the unit to start working.
either .
either .
either of tem-
will start flashing.