RC Logger RC EYE One S 88005RC Instructions D'utilisation page 25

Figure 6b
88006rC (mode 2) elevator
Elevator denotes the movement around the cross axis which can be compared to the nodding of a head.
Through this, the "RC EYE One S" gains flight speed forwards or backwards or decelerates. The two red
propellers show "front".
If you move the right control lever (figure 7a) to the front, the "RC EYE One S" will float forwards as a whole.
If you move the control lever to the rear, the "RC EYE One S" will float backwards. If the "RC EYE One S"
turns slowly to the rear in hover flight (direction of the white arrow), the model must be trimmed with the
black trimming button (also in the counter-direction). Push the trimming button until the "RC EYE One S"
no longer turns away to the rear.
25