Les langues disponibles

Les langues disponibles

OPERATOR'S MANUAL
40 V LITHIUM-ION BATTERY PACK
OP40204/OP40404/OP40504/OP40604/
OP40605/OP40804/OP40125/OP40754
To register your RYOBI product, please visit:
http://register.ryobitools.com
Use this battery pack for RYOBI 40 V cordless products only.
Refer to the Operator's Manual provided with product. Always
mention the model number above when communicating with
us regarding this battery pack.
SAFETY RULES
WARNING!
READ AND UNDERSTAND ALL INSTRUCTIONS.
Failure to follow all instructions listed below, may result
in electric shock, fire and/or serious personal injury.
 Battery tools do not have to be plugged into an elec-
trical outlet; therefore, they are always in operating
condition. Be aware of possible hazards when not
using your battery tool or when changing accessories.
Following this rule will reduce the risk of electric shock,
fire, or serious personal injury.
 Do not place battery tools or their batteries near fire
or heat. This will reduce the risk of explosion and possibly
injury.
 Do not crush, drop or damage battery pack. Do not
use a battery pack or charger that has been dropped
or received a sharp blow. A damaged battery is subject
to explosion. Properly dispose of a dropped or damaged
battery immediately.
 Batteries can explode in the presence of a source
of ignition, such as a pilot light. To reduce the risk of
serious personal injury, never use any cordless product
in the presence of open flame. An exploded battery can
propel debris and chemicals. If exposed, flush with water
immediately.
 Do not charge battery tool in a damp or wet location.
Following this rule will reduce the risk of electric shock.
 Do not store or charge battery packs in locations
where the temperature is less than 50°F or more than
100°F. Do not store outside or in vehicles.
 Charge only with RYOBI 40 V lithium-ion battery
chargers. Use of other chargers may result in personal
injury, fire, or damage.
 Do not charge battery in an area of extreme heat or
cold. It will work best at normal room temperature.
 Under extreme usage or temperature conditions, bat-
tery leakage may occur. If liquid comes in contact with
your skin, wash immediately with soap and water. If
liquid gets into your eyes, flush them with clean water
for at least 10 minutes, then seek immediate medical
attention. Following this rule will reduce the risk of seri-
ous personal injury.
 When battery pack is not in use, keep it away from
other metal objects like: paper clips, coins, keys, nails,
screws, or other small metal objects that can make a
connection from one terminal to another. Shorting the
battery terminals together may cause sparks, burns, or a
fire and can lead to personal injury or property damage.
 Always remove battery pack from your tool when you
are assembling parts, making adjustments, cleaning,
or when not in use. Removing battery pack will prevent
accidental starting that could cause serious personal
injury.
 Always remove battery pack before storing the device.
 When battery becomes fully charged, unplug the
charger from the power supply and remove the bat-
tery pack from the charger.
 Always wear eye protection with side shields marked
to comply with ANSI Z87.1. Failure to do so could result
in objects being thrown into your eyes and other possible
serious injuries.
 Keep battery pack dry, clean, and free from oil and
grease. Always use a clean cloth when cleaning. Never
use brake fluids, gasoline, petroleum-based products, or
any solvents to clean battery pack.
 Do not use a battery pack that is damaged or modified.
Damaged or modified batteries may exhibit unpredictable
behavior resulting in fire, explosion or risk of injury.
 Do not modify or attempt to repair a battery pack that
has been damaged.
 Do not expose a battery pack or appliance to fire or
excessive temperature. Exposure to fire or temperature
above 265°F (130°C) may cause explosion.
 Have servicing performed by a qualified repair person
using only identical replacement parts. This will ensure
that the safety of the product is maintained.
 Disconnect the battery pack from the appliance be-
fore making any adjustments, changing accessories,
or storing appliance. Such preventive safety measures
reduce the risk of starting the appliance accidentally.
Note: This warning is not applicable for batteries that
cannot be disconnected from the appliance in normal
use.
 Recharge only with the charger specified by the
manufacturer. A charger that is suitable for one type
of battery pack may create a risk of fire when used with
another battery pack.
 Follow all charging instructions and do not charge the
battery pack or appliance outside of the temperature
range specified in the instructions. Charging improperly
or at temperatures outside of the specified range may
damage the battery and increase the risk of fire.
 Save these instructions. Refer to them frequently and
use them to instruct others who may use this tool. If you
loan someone this tool, loan them these instructions also.
OPERATION
LITHIUM-ION BATTERY PACKS
Lithium-ion batteries deliver fade free power for their entire
run time. Lithium-ion tools will not gradually lose power due
to decreasing battery charge. Instead, power from the battery
pack will drop from full to zero once the full charge has been
1 - English
Table des Matières
loading

Sommaire des Matières pour Ryobi OP40754

  • Page 1 To register your RYOBI product, please visit: http://register.ryobitools.com  Always remove battery pack before storing the device. Use this battery pack for RYOBI 40 V cordless products only.  When battery becomes fully charged, unplug the Refer to the Operator’s Manual provided with product. Always...
  • Page 2 drained from the battery. Once this happens, recharging of When a hot battery pack is placed on the charger, the charger the battery is required. It is not necessary to drain the battery may indicate the pack is not ready to charge. Please refer pack completely before recharging.
  • Page 3: Règles De Sécurité

    OP40605/OP40804/OP40125/OP40754 de procéder au nettoyage, ou lorsque l’outil n’est pas Pour enregistrer votre produit de RYOBI, s’il vous plaît la visite : utilisé. Le fait de retirer le bloc-piles permet d’empêcher un http://register.ryobitools.com démarrage accidentel pouvant entraîner des blessures graves.
  • Page 4: Entretien

    charge de pile. Au contraire, la puissance du blocs-piles passe qu’elle est chaude. Le chargeur commence automatiquement la de pleine à nulle une fois la pile déchargée. Une fois que ceci a recharge lorsque le refroidissement du bloc-piles atteint environ lieu, la puissance de l’outil passe de pleine à...
  • Page 5: Reglas De Seguridad

     Cargar únicamente con cargadores RYOBI de baterías 40 V puede dañar la batería y aumentar el riesgo de incendios. de iones de litio. Usar otros cargadores puede causar lesiones  Guarde estas instrucciones.
  • Page 6 CÓMO CARGAR EL PAQUETE DE BATERÍAS FUNCIONAMIENTO CUANDO ESTÁ CALIENTE Cuando se utiliza una herramienta de manera continua, es posible PAQUETES DE BATERÍAS DE IÓN DE LITIO que el paquete de baterías se caliente. Un paquete de baterías La potencia producida por las baterías de iones de litio no mengua caliente puede colocarse directamente en el puerto del cargador, durante todo el tiempo operativo.
  • Page 7  Place your exposed battery pack in a large bucket, such as a 5 gallon or similar bucket, and fill the bucket with WARNING: regular tap water. Do not place more than two packs in NEVER IMMERSE OR EXPOSE YOUR BATTERY the bucket.
  • Page 8 RYOBI is a trademark of Ryobi Limited and is used pursuant to a license granted by Ryobi Limited. RYOBI est une marque de Ryobi Limited et est utilisée en vertu d’une licence accordée par Ryobi Limited.

Ce manuel est également adapté pour:

Op40404Op40504Op40604Op40605Op40804Op40125 ... Afficher tout

Table des Matières