Knock Code; Knockon - LG G3 Guide De L'utilisateur

Getting to know your phone

Knock Code

The Knock Code feature allows you to wake and unlock the screen with your own
Knock Code pattern. When enabled, Knock Code divides the screen into 4 parts and
uses your unique combination of taps to secure your device. You can disable this
feature in the Lock screen settings.
NOTE:
If you enter an incorrect Knock Code combination 6 times, it will be
•
necessary to use your Google account log in or backup PIN.
Use the fingertip instead of finger nail to tap the screen when using Knock
•
Code.
1 Tap >
Code.
2
Follow the on-screen steps to set your Knock Code. You have to create a Backup
PIN as a safety measure in case you forget your Knock Code.
Unlock the screen using the Knock Code
You can wake up and unlock the screen by tapping the Knock Code, set up in the
previous section, when the screen is off.

KnockON

You can wake up, or turn off, the screen as easily as double-tapping the screen.
While the screen is off, and idle, double-tap the center screen quickly to wake the
screen. To turn the screen off, double-tap the Status bar in any screen (except on the
camera viewfinder) or empty area on the Home screen.
NOTE: When turning the screen on, make sure you do not cover the
proximity sensor. Doing so will turn the screen off immediately after turning it
on in order to prevent abnormal turning on in your pocket or bag.
44
> > Display tab > Lock screen > Select screen lock > Knock