Dorman 13734 Manuel D'instructions

INSTRUCTIONS
KEYLESS ENTRY
REMOTE
13734
BEFORE YOU BEGIN:
• Always wear proper safety
equipment when performing repairs.
• Ensure at your point of purchase
that this part fits your exact
vehicle configuration.
• Reference the appropriate service
manual for your vehicle. If you do
not have a service manual, and do
not have the training or experience
to perform the necessary
procedures correctly, seek the
services of a qualified technician.
NEED HELP?
Please call our Technical Support
team for assistance from our team of
certified automotive experts.
1-866-933-2911
© 2025 No reproduction in whole or in part without prior written approval.
13734_Instructions
NOTE: One functional key must be present to program new remotes.
NOTE: All currently programmed and new remotes must be reprogrammed to the vehicle in
the same programming session.
INSTRUCTIONS
STEP 1:
Close all doors, trunk/liftgate, hood, windows, and sunroof (if equipped). Enter the vehicle through the
driver's door and close it.
STEP 2:
Insert key into ignition, but do not turn at this time.
STEP 3:
Hold down unlock button on driver's door. Do not release unlock button until Step 8 of programming
instructions.
STEP 4:
Turn ignition to on position without starting vehicle.
STEP 5:
Turn ignition off.
STEP 6:
Turn ignition to on position without starting vehicle.
STEP 7:
Turn ignition off.
STEP 8:
Release unlock button on driver door.
STEP 9:
Doors will lock and unlock automatically.
STEP 10:
Hold down lock and unlock buttons on the remote being programmed simultaneously until doors lock and
unlock. This may take up to 30 seconds.
STEP 11:
Repeat Step 10 for each additional remote (including any existing remotes).
STEP 12:
Turn ignition to on position to exit remote programming mode.
STEP 13:
Open windows, exit vehicle, close all doors and test all functions on each remote. If a remote does not
function correctly, repeat this procedure from Step 1.
Dorman Products, Inc. Corporate Office and Customer Service: 1-800-523-2492.
Disclaimer: It is impossible in these instructions to account for all possible circumstances or situations that you may experience when at-
tempting to install this product. Please consult with a qualified auto technician before attempting to perform any work you are not qualified to
do. Automobiles can be hazardous to work on; be sure to take all necessary safety precautions. Failure to do so may result in property damage
or personal injury. Certain motor vehicle standards and performance requirements may apply to your motor vehicle (such as Federal Motor
Vehicle Safety Standards by the National Highway Traffic Safety Administration). Be sure that your work is performed in accordance with such
standards and that you do not disable any motor vehicle safety feature.
PAGE 1 OF 3