Kimex 163-4320 Manuel D'utilisation page 14

Sound Menu Contents
Volume
Equalizer
Balance
Headphone
AVL (Automatic
Volume Limiting)
Headphone/Lineout
Dynamic Bass
Surround Sound
Digital Out
Network Menu Contents
Network Type
Scan Wireless
Networks
Press WPS on your
wifi router
Internet Speed Test
Advanced Settings
Wake On
Note: For detailed information on the options of this menu refer to the Connectivity section.
Adjusts the volume level.
Selects the equalizer mode. Custom settings can be made only when in User mode.
Adjusts whether the sound comes from the left or right speaker.
Sets headphone volume.
Please ensure before using headphones that the headphone volume is set to a low
level, to prevent damage to your hearing. Only available if Headphone/Lineout
option is set to Headphone.
Sets the sound to obtain fixed output level between sources.
When you connect an external amplifier to your Display using the headphone jack, you
can select this option as Lineout. If you have connected headphones to the Display,
set this option as Headphone.
Please ensure before using headphones that this menu item is set to Headphone. If it
is set to Lineout, the output from the headphone socket will be set to maximum which
could damage your hearing. A warning message will be displayed on the screen when
switched to Lineout option. Remove your headphone and press OK to continue.
Enables or disables the Dynamic Bass.
Surround sound mode can be changed as On or Off.
Sets digital out audio type. PCM and Compressed options are available.
Disable the network connection or change the connection type.
Start a search for wireless networks. This option will be available if the Network Type
is set as Wireless Device.
If your modem/router device has WPS, you can directly connect to it using this option.
Highlight this option and press OK. Go to your modem/router device and press the
WPS button on it to make the connection. This option will be available if the Network
Type is set as Wireless Device.
Start a speed test to check your connection bandwidth. The result will be displayed
on the screen when finished.
Change the IP and DNS configurations of your Display.
Enable or disable this feature by setting it as On or Off.
English - 12 -