Publicité
BO600EVO, BO900EVO, P300EVO, P600EVO
EN
Vertical & horizontal architerctural handles with LED indication
2] PACKAGE CONTENTS
Handle
Screw cover
1
Screw kit
1
3] RECOMMENDATIONS
NF S61-937 Conformity
This product meets the
requirements of NF S61-937 only
with a 24V or 48V dc supply voltage
by a SELV source.
Recommended power supplies
The architectural handle is designed
for magnetic lock with a holding
force of 300kg each, supply with
under 12/24/48V dc. Repair the
power of the alimentation according
to the model of handle.
Wiring
Plan the correct cable cross-
section according to the distance
between the power supply and the
architectural handle.
Tips for use
The architectural handle can be
installed on doors by pulling with
one or two leaves, one of which is
Wall support
1
1
PCB Box
Cable
1 (or 2)
1
Cover
Plastic cap
1
12V (Rouge/Red)
GND (Noir/Black)
D0 / A+ (Vert/Green)
D1 / B- (Blanc/White)
Manual
1
considered semi-fixed. It is installed
on perfectly aligned doors, otherwise
a shim must be provided (Ref: REO).
You can also reinforce your door
with the reinforcement profile (Ref:
PRP800) and hide your electrical
installation with the cable gland (Ref:
ALMA).
Reminder
The electromagnetic locks are
already mount on the wall support.
The architectural handle is
provided with armature plates. It is
recommended to mountthe caps on
both ends
before installation.
You must fix the plastic handle with
the two screws provided with the
product.
Plastic
handle
2
1
3
Publicité
