Publicité
Warnings
•
No power cord option for Codec EQ: When the optional power cord is not ordered
with the system, the customer is responsible for selecting the appropriate power
cord to be used with this product. Using a non-compatible power cord with this
product may result with electrical safety hazard. For orders to be delivered to
Argentina, Brazil, China and Japan, appropriate power cord must be ordered with
the system.
Rating of the power cable: 10 A, 250 V
Power connector: EL 701B (IEC 60320/C13)
Power (100-240 VAC, 50-60 Hz)
• Use a power cable that meets the requirements of the power specification of
the codec.
• Keep the power plug and outlet easily accessible in case you need to
disconnect the device from power.
• This device is designed for connection to TN and IT power systems.
• Network connectivity: Use either Ethernet LAN or Wi-Fi. Non-radio devices,
which have the letters 'NR' in their product identifier (PID), don't support Wi-Fi.
•
Do not block any ventilation openings on the codec. Minimum 10 cm / 4 in. free
space in front and rear side of the unit. When mounted in a rack, observe that the
ambient temperature does not exceed 35°C.
10 cm / 4 in.
D15548.01 | © 2025 Cisco Systems, Inc. All rights reserved.
10 cm / 4 in.
6
Publicité
