Publicité
4
Turn on the codec
5
Complete the software setup
1.
Turn on the screen. See the user documentation for the screen if HDMI input must be set manually.
2.
The system powers up automatically. If the system doesn't power up, check the power switch on the
codec and the camera.
3.
When you see the Welcome screen, follow the instructions to complete the setup.*
4.
We recommend that you upgrade the software on your Codec EQ before putting it to use. See the
Administrator Guide for the codec: https://www.cisco.com/go/roomkit-docs
* Alternatively, run the API command: xCommand SystemUnit ProductPlatform Set Platform:
ROOMKITEQ
D15548.01 | © 2025 Cisco Systems, Inc. All rights reserved.
1
2
3
2
3
1
14
Publicité
