Troubleshooting - Snapper 1688056 Guide D'utilisation

TROUBLESHOOTING

PROBLEM
Motor fails to
start when trigger
is depressed.
Unit will not start. Power switch is defective. Have the power switch
The unit will start,
but air will not
flow through the
tube.
Cruise Control
Lever doesn't
work.
POSSIBLE CAUSE
Battery is not secure.
Battery is not charged.
Tube is blocked.
The screw is loose.
SOLUTION
To secure the battery pack,
make sure the latch on the top
of the battery pack snaps into
place.
Charge the battery pack
according to the instructions
included with your model.
replaced by an authorized
service center.
Clear the blockage.
Tighten the screw with a
screwdriver.
19