Operation - Snapper 1688056 Guide D'utilisation

OPERATION

CONNECTING THE BATTERY TO THE BLOWER
• Insert the plug of one side of the cable into the socket in the blower – line up
the lugs on the plug with the slots in the socket.
• Push the plug into the socket then turn it clockwise until the plug's latch
engages audibly.
• Insert the plug of the other side of the cable into the socket in the battery –
line up the lugs on the plug with the slots in the socket.
• Push the plug into the socket then turn it clockwise until the plug's latch
engages audibly.
W A R N I N G
Always take care of your feet, children, or pets around you when remove
the battery pack. Serious injury could result if the battery pack falls. NEVER
remove the battery pack when in a high location.
CHARGE BEFORE FIRST USE
W A R N I N G
Always remove battery pack from the product when you are assembling parts,
making adjustments, cleaning, or when not in use. Removing battery pack will
prevent accidental starting that could cause serious personal injury.
1
3
13
2
4