Instructions For Battery Use; Cleaning And Maintenance - Reer AngelGuard Mode D'emploi

9. And more...
In this area you can adjust the
following settings:
Please note: after successfully changing the settings, the GPS
clock display will show „SET OK".
Call options: Up to 8 contact numbers can be saved,
which can call the watch. All other callers are
automatically blocked.
The contact numbers 1 through 3 are the emergency numbers,
which the child can call via a speed-dial button or the SOS button.
Please note: Should the watch be connected to several smart-
phones, it will be possible to edit the contact number list only
from the smartphone that was connected to the watch first.
Otherwise, it can result in a faulty update.
Position options:
Position type: Here you can select the positioning mode:
• Accurate mode: mainly via GPS, in case of bad signal reception
via WiFi and LBS (high battery usage of watch)
• Standard mode: predominantly WiFi and LBS, GPS where ap-
propriate
• Energy saving mode: Positioning only via WLAN and LBS
Positioning: 5 different positioning intervals can be selected: 3
/ 5 / 10 / 20 / 30 minutes. The position data of the watch will
be transmitted to the watch in the set interval. (Please note: The
interval selection has a substantial influence on the battery run-
time!)
Safety area: A safe area can be drawn with the finger on the
map, e. g. the way to the kindergarten or school. When the
watch leaves this area, a notification will be sent to the app.
26
Take-off-Sensor: if this notification function is activated, a
notification message is sent should the watch be taken
off.
Settings:
Silent mode: up to 4 silent times can be set, during which the
watch is silent. During this time period, the emergency functions
(SOS-button and speed-dial button) are still activated and can be
used as usual.
Time setting: the time can be set

Instructions for battery use

A complete charging period is approx. 2 h long and will last for
2-3 days. For saving battery charge, you have the following
options:
• Select longer positioning intervals: The longer the intervals, the
less battery charge is used
• Change positioning mode: The watch consumes less energy
with a less accurate positioning

Cleaning and maintenance

Always disconnect the mains adapters from the wall power socket
before cleaning the unit. Only use a slightly dampened cloth. Do
not submerge the unit in water. Do not use chemical detergents.
This product does not require any special maintenance. Repairs to
the unit must be carried out by skilled personnel only.
27