Before First Use - Reer AngelGuard Mode D'emploi

Speed-dial
4 hold down for at least 3 seconds to call
button 2
contact person 2
On/Off button
hold down longer to switch the watch
5
on/off
Hang up
press shortly to end the phone call
Speed-dial
6 hold down for at least 3 seconds to call
button 3
contact person 3
Messages
press shortly, then press SOS emergen-
cy button to receive voice messages
Contacts list
press shortly, repeatedly until the
desired contact person is displayed and
then hold down speed-dial button 2 to
send a voice message to the contact
person

Before first use

1. Charge the watch by opening the cover
cable into the GPS watch and connecting to a power source.
2. Purchase a common nano SIM card with at least 2G compati-
bility and activate it according to manufacturer specifications.
Caution: Prior to inserting the SIM card, the SIM PIN lock must
be deactivated. To do that, please initially insert the SIM card
into a mobile phone and deactivate the SIM PIN lock there via
the SIM card settings. Many providers additionally require the
selection of a data volume rate via an internet browser.
22
1 , inserting the USB
3. Insert the SIM card into the SIM slot
watch must be switched off for this. Now switch on the watch
. It takes a short while for the watch to detect the data
5
after the SIM card has been inserted.
4. Download and install the free reer app „AngelGuard" onto
your smartphone:
Android:
minimum
Version 4.0
5. Open the app and register it by adding a user:
6. You can add the watch via the QR code:
9
of the watch. The
iOS:
minimum
Version 7.0
or manually
via „Add".
23