Preparation; Installation Instructions - Allen + Roth Rigsby Rgwvt2439 Instructions

PREPARATION

Before beginning assembly of product, make sure all parts are present. Compare parts with package
contents list and hardware contents list. If any part is missing or damaged, do not attempt to
assemble the product.
Estimated Installation Time: 10 minutes (24 hours for adhesive to dry).
Tools Required for Installation (not included): Silicone compound, Philips Head Screwdriver.

INSTALLATION INSTRUCTIONS

Step 1: Backsplash Installation
1. To mount the backsplash (B) to the wall,
apply a thin bead of silicone compound
(not included) to the unpolished back side
and bottom of the backsplash (B). Position
backsplash (B) as shown onto vanity top
(A) and against the wall. Clean any ex cess
silicone compound before allowing to dry.
1
B
3
A