Safety Information; Preparation; Mounting Options - Allen + Roth Sp0217-09A Manuel

SAFETY INFORMATION

Please read and understand this entire manual before attempting to assemble or install the
product.
WARNING
· Safety discard all packing material.
· Keep plastic bags and small parts away from children.
· Safety glasses should be worn at all times.
· Do not load this cabinet with more than 50 lbs.
· Do not load each shelf with more than 25 lbs.
CAUTION
· The included plastic wall anchors are intended for use with solid wall applications
only (tile or concrete).
· For recess mount, do not install side panels.

PREPARATION

Before beginning assembly of product, make sure all parts are present. Compare parts with
package contents list and hardware contents list. If any part is missing or damaged, do not
attempt to assemble the product.
Estimated Assembly Time: 30 minutes (with recommended two-person installation).
Tools Required for Assembly (not included): Measuring tape, Level, Phillips screwdriver, Stud
finder, Reciprocating saw and Wood shims.
This product can be installed in one of two mounting options: SURFACE MOUNT (continue to
page 5) or RECESS MOUNT (skip to page 7).

MOUNTING OPTIONS

Select the hardware appropriate for wall installation.
STUD WALL: Secure to wall using long screws (GG) and a washer
(not included) at marked stud locations.
DRYWALL: Drill holes at marked locations and secure to the wall with
toggle bolts and washers (not included).
CONCRETE WALL: Drill 5/16-inch holes at marked locations, then
insert wall anchors (HH) into holes. Secure cabinet (C) to wall using
long screws (GG).
Lowes.com/allenandroth
4