Allen + Roth SP0217-09A Manuel page 8

ASSEMBLY INSTRUCTIONS
Note: These steps are applicable to both surface-mount installations and recess-mount installations.
1. Install the glass shelves (E) to the desired positions
with shelf clips (BB), making sure they are level.
Hardware Used
AA
Shelf Clip
2. Use the shelf hole plugs (CC) to seal the empty
holes.
Hardware Used
CC
Shelf Hole Plug
3. Stick the bumpers (FF) on the surface of cabinet
body. As shown drawing.
Hardware Used
FF Bumper
1
BB
x 8
2
x 20
CC
3
x 2
8
E
FF
Lowes.com/allenandroth