Publicité
E06 E
Temperature probe not con-
nected (or defective)
E07 E
Failure during current
measurement
E08 E
Failure during communica-
tion with printed circuit board
E09 E
Overheated printed circuit
board
E10 E
Grid undervoltage detected
8. Spare parts
190-11030
IH 025-P3
190-11050
IH 025-P4
190-11020
IH 025-P2
190-11040
IH 025-D
190-10080
IH 025/030/070-S
190-71010
IH 025-G
190-11010
IH 025-B
190-10010
IH P2
190-10020
IH PROTECTIVE GLOVES
© simatec ag
Portable Induction Heater IH 025 VOLCANO
Check the temperature probe.
Return IH 025 for repair.
Return IH 025 for repair.
Wait until the printed circuit board
cools. Alternatively, the PCB tempera-
ture will be displayed. The device can
be re-started at a temperature below
40 °C (displayed as <40).
Connect the device to another socket or
shorten the extension cord.
Printed circuit board 100 V
Printed circuit board 115 V
Printed circuit board 230 V
Printed circuit board display
Power switch
Casing top with keyboard
Carrying case
K-type temperature probe
Protective gloves
29
Publicité
