Pioneer S-DV424 Guide D'installation page 3

2
Place the front speakers onto the speaker stands as shown below.
Line up the base of the speaker with the stand (figure A), then push the speaker slowly onto the speaker
stand (figure B). Use even pressure to make sure the speaker is fully inserted and secure.
A
3
Secure the speaker to the speaker stand with the screws provided.
Using two large screws for each speaker stand, secure the speaker to the speaker stand as shown in the
illustration below.
4
After you have finished, refer to the other side of this sheet for the speaker setup
options available with this system.
B
3
En