Télécharger Imprimer la page

HOMCOM NSC-250-11F1 Mode D'emploi page 5

Publicité

23. Do not hang the power cord on the surface of the heater's heat sinks to prevent
burns.
24. If the heater is covered or improperly placed, it can cause fire. Therefore, it is
not allowed to use the heater with a programmer, timer or any other device that can
automatically turn on the power.
25.
No covering warning: to avoid overheating, do not cover the heater.
26. Do not use this heater around bathtubs, sprinkle heads or swimming pools.
IX. Maintenance
1. External cleaning must be done after the switch is turned off, the power plug is
unplugged and the machine is cooled.
2. Do not use it in a high temperature environment or in an open flame to avoid
discoloration or deformation of the machine.
3. Clean and maintain as shown.
4. After cleaning and maintenance, put the parts into the packing box in the original
packaging order.
5. When the machine is not in use, store it in a place with good dry and ventilated
conditions and avoid crushing and collision.
6. This machine only needs the general external cleaning and maintenance,
namely, use a soft cloth with a neutral detergent to remove dirt from the surface of
the machine, and then dry it with a dry cloth.
7. Do not rinse it directly with water.
8. Do not use thinner, toluene, acid lotion, lamp oil or chemical rag to avoid
discoloration or deterioration.
Environmental Protection
Waste electrical production should not be disposed of with household
waste. Please recycle where facilities exist. Check with your Local
Authority or retailer for recycling advice.
Toluene
Lamp oil
Acid
Disposal
4

Publicité

loading

Ce manuel est également adapté pour:

Nsc-200-9f1Nsc-150-7f1820-438v90820-438v91820-438v92