Cleaning And Maintenance - Elnur Gabarron BRISS Instructions D'installation Et Guide D'utilisation

CLEANING AND MAINTENANCE

BEFORE CLEANING THE DEVICE, MAKE SURE to turn off and unplug the plug to avoid risk
of electric shock.
1. In order to prolong the life of the product and maintain the best possible performance,
it is recommended to clean the unit regularly.
1. General cleaning.
Do not use gasoline, solvents or other chemical products for cleaning and maintenance.
Use a soft cloth for cleaning.
2. Filter cleaning.
Remove the dust filter and wash it under water using a soft brush or cloth.
3. Water tank cleaning.
Remove the water tank by pulling it. Before the tank is completely out, lift it up to
liberate the locator from the clamp below it. Use a wet cloth with neutral detergent for
cleaning. Rinse with water, dry off and instal the tank again.
4. External Parts Cleaning.
NOTE:
1. The safety switch system will stop the unit automatically while the back cover is removed.
2. In order to keep good condition for humidifying and purifying, please clean the filtering
system frequently.
3. Never immerse the unit, power cord and plug into water.
4. Do not attempt the unit; must be repaired in an official technical service.