Publicité
INSERT THE MEMORY CARD
Insert the Micro SD memory card to record and store your videos and
photos. Please insert the Micro SD memory card by following the steps
below:
1. Insert the memory card. Ensure that the metal contacts are inserted first.
Push the memory card down until you hear an audible click (the memory
card can only be inserted in one way. Do not force the card in if it will not
go in smoothly).
2. To remove the memory card, simply push in and the card will eject out.
INSTALLING THE PRINT PAPER
1.
1. Open the paper slot in the direction of the arrow.
2. Install the printing Paper into the slot.
3. Close paper slot door.
NOTE :
- Please follow the correct direction for paper installation. If put it in wrong direction, it can
not print with image.
- Make sure to place the paper in the middle of the card slot when closing the door, make
sure the slot door is completely closed to prevent the paper from coming out during
printing.
- When you tear the photo, tear the photo paper upwards, as in the picture 4.
POWER ON/OFF
Press and hold Power on and power off button.
NOTE : If the camera can not be powered on, please try to charge the camera for at least 30
minutes and then power on. If the camera is frozen (due to incorrect operation), please use
a sharp pin to stick into the reset hole to power the camera off, and then restart the camera.
MENU
Camera will enter menu when powered on.
Press ▲▼ to select modes, press ② button to enter the selected
mode, and press ④ button to go back to the menu.
2.
3.
4.
Publicité
