Télécharger Imprimer la page

TC-Helicon HARMONY SINGER 2 Guide De Démarrage Rapide page 8

Masquer les pouces Voir aussi pour HARMONY SINGER 2:

Publicité

8
HARMONY SINGER 2
(EN) Controls
Key Selector – Selects a major key for pitch correction. CH setting
(1)
is Harmony – Selects the harmonies that will be blended with
your voice.
Ground lift – If you experience buzz or hum, try pressing the ground
(2)
lift button in or out.
Guitar thru
(3)
Level – Adjusts the volume of the harmonies.
(4)
USB – Accepts micro-USB cables for firmware updates.
(5)
On/Off
(6)
Reverb – Selects the type and amount of reverb effect.
(7)
Guitar input
(8)
Tone – Engages 'Adaptive Tone' for EQ, compression, de-essing
(9)
and gating.
Footswitch – Bypass the harmony effect with a single press.
(10)
Holding for a few seconds bypasses harmony and reverb effects.
Out – Connect to a mixer or powered speaker.
(11)
Mic – Connect your microphone.
(12)
Power – Connect a 9 V / >300 mA power supply, such as the
(13)
PowerPlug 9 (not included). The pedal also accepts 4 x AA batteries.
控制和接口
(CN)
Key Selector –
(1)
择将与您的声音融合的和声。
Ground lift –
(2)
如果您听到嗡嗡声或嗡嗡声
按地面提升按钮。
Guitar thru
(3)
Level –
(4)
调节和声的音量。
USB –
micro-USB
(5)
接受
电缆以进行固件更新。
On/Off
(6)
Reverb –
(7)
选择混响效果的类型和数量。
Guitar input
(8)
Tone –
"
"
(9)
启用
自适应音调
以进行均衡
Footswitch – 一次按一下和声效果。 按住几秒钟会绕
(10)
过和声和混响效果。
Out – 连接到调音台或有源扬声器。
(11)
Mic – 连接麦克风。
(12)
Power – 连接 9 V /> 300 mA 电源, 例如 PowerPlug 9 (不附带)。
(13)
踏板还可以容纳 4 节 AA 电池。
,
请尝试向内或向外
,
,
压缩
去噪和门控。

Publicité

loading