Publicité
2.Activate the WIFI function in the settings of your appliance.
3.Place the appliance at a distance of about 5 meters to your router.
4.Long press the "Timer" button to start the network configuration, when
the WIFI indicator flashes, you can connect the WIFI. After 3 minutes, the
status will be canceled if there is no network configuration, and the
indicator light is off. If you need to re-connect the WIFI, long press the
"Timer" button to start the network configuration again, the WIFI indicator
will flashes again.
WIFI Connected
● Method 1
Connected via Bluetooth
Open the Bluetooth of your mobile phone or other device.
When WIFI indicator flashes, open "Smart Life" APP, the unit will
connected via bluetooth automatically.
● Method 2
When WIFI indicator flashes, select "Add Device"-"Large Home
f
w
Appliances"-"Portable Air Conditioner",
the display.
Check the status of the WIFI indicator and choose the correct status.
If the WIFI indicator flash rapidly, it can connected directly.
f
W
f
w y, p
"Go to Connect"
W
m
"SmartLife-XXXX", then back to the APP, the WIFI will
connect ok.
Remarks:
Once the appliance has been successfully connected, the WIFI lamp lights
up. Now you can operate the appliance using the app.
Press and hold the "Timer" button for about 5 seconds, the appliance
disconnect, the WIFI lamp lights off.
103
Publicité
