Hansgrohe AXOR Citterio 27831 0 Série Instructions De Montage / Mode D'emploi / Garantie page 8

3
4
8
2
1
English
Install the anchors.
Seal the wall around the anchors
using waterproof sealant.
Failure to seal the wall may lead
to water damage.
Screw the support elements to the wall with the
screws.
Position the wallbar over the support elements.
Press the bar firmly into place.
Wallbar removal
Insert a small tool, such as an Allen wrench,
through the hole in each escutcheon.
Push upward against the retaining pin very firmly
(1).
Pull out on the end of the wallbar (2).