Selecting A Preset Procedure - SDC MLD-810 Manuel D'utilisation

Selecting a Preset Procedure

1
Press the Menu/Selection button 2x
for Procedures.
The display shows Procedures.
2
Press the Up and Down Arrow buttons
to scroll through the Procedure options.
In this case, the first option shown is
Aphthous Ulcer. Continue to press the
Up or Down Arrow buttons to browse
through the other procedures.
3
To make a selection, press the
Menu/Selection button again.
After selecting a procedure, you can manually adjust the power settings if needed by
pressing the Up or Down Arrow buttons. The image below demonstrates the main
power screen after a preset procedure is selected. It happens to be a Continuous
Wave Mode procedure. It also shows the battery is fully charged.
Below is a list of all 12 preset procedures in the alphabetical order that they
are displayed:
Order Procedure
1 Aphthous Ulcer
2
3 Class V Restoration
4 Cuspid Exposure
5 Frenectomy
6 Gingivectomy
7 Hyperplasia
8 Implant Recovery
9 Laser Troughing
10 Operculectomy
11 Recontouring
12 Sulcular Debridement
NOTE: See page 18 for a full list of common procedures and recommended
power settings that can also be performed using the MLD-810 Laser.
Biopsy Continuous
Continuous
Continuous
Continuous
Continuous
Continuous
Continuous
Continuous
Continuous
Continuous
Continuous
Mode Power
Pulse 1.4 W
1.2 W
1.2 W
1.0 W
1.2 W
1.0 W
1.2 W
1.2 W
1.0 W
1.5 W
1.0 W
0.8 W
39