Slide Hammer T- Puller
1. Place the Slide Hammer (4) over the end of the Pull Button.
2. Slide the weight backward and forward until the dent is
raised. (Figure 3)
3. Remove T-Puller.
Lever Puller
1. Place the Lever Puller (3) on the Pull Button. (Figure 4)
2. Turn the adjustment knob until both feet of the puller are
flat against the vehicle's surface.
3. Slowly squeeze the lever handles until there is a pop and
the dent is raised. (Figure 5)
4. Stop when the dent returns to a normal surface level.
5. Turn the adjustment knob if necessary and repeat the
process if additional pulling is needed.
6. Remove Lever Puller.
Pull Button Removal
NOTE: Fill the Spray Bottle 3/4 full of denatured alcohol (not
included).
1. If necessary, spray release agent around the Pull Button to soften the glue.
2. Use the non-marring Scraper (6) provided in this kit to remove glue.
NOTE: Be careful if using on a vehicle that has been resprayed. The paint is not bonded as well as
a factory finish and may lift.
3. Clean the area thoroughly to remove any release agent residue.
4. Apply wax to the area the release agent was used to protect the finish of the vehicle.
PERFORMANCE TOOL
warranties give specific legal rights. Except where prohibited by local law, the law of the State of Washington
governs all warranties and all exclusions and limitations of warranties and remedies. There may be other rights
which vary from state to state.
PERFORMANCE TOOL
use and service. A defective product may be returned for a free replacement within 90 days from the date of
purchase, provided that product is returned to place of purchase immediately after discovery of defect. After 90
days and up to one year from date of purchase, PERFORMANCE TOOL
our examination shall disclose to be defective and under warranty. These warranties shall be valid only when a sales
receipt showing the date of purchase accompanies the defective product or defective part (s) being returned. For
part (s) after 90 days, please remit your request, postage prepaid to:
These warranties exclude blades, bits, punches, dies, bulbs, fuses, hoses, and other consumables which must be
replaced under normal use and service. These warranties shall not apply to any product or part which is used for a
purpose for which it is not designed, or which has been repaired or altered in any way so as to affect adversely its
performance or reliability, nor shall these warranties apply to any product or part which has been subject to misuse,
neglect, accident or wear and tear incident to normal use and service.
PERFORMANCE TOOL
connection with its products.
Except for warranties of title and the limited express warranties set forth above, PERFORMANCE TOOL
express or implied warranties of any kind with respect to its products. In particular, PERFORMANCE TOOL
no implied warranty of merchantability and no implied warranty of fitness for any particular purpose, except that for
goods purchased primarily for personal, family or household use and not for commercial or business use,
PERFORMANCE TOOL
warranty of fitness for a particular purpose), but only for the particular qualities or characteristics, and for the
duration, expressly warranted above.
The laws on limitation of implied warranties may differ from state to state, so the above limitations may not apply in
all cases.
PERFORMANCE TOOL
manner related to any product, or to the design, use, or any inability to use the product. The sole and exclusive
remedy for a defective product or part shall be the repair, or replacement thereof as provided above. The laws on
limitation of remedies or on consequential, incidental or special damages may vary from state to state, so the above
limitations may not apply in all cases.
extends only the following warranties, and only to original retail purchasers. These
®
warrants the product to be free from defects in materials and workmanship under normal
®
PERFORMANCE TOOL, P.O. Box 88259 Tukwila, WA 98138
does not authorize any other person to make any warranty or to assume any liability in
®
makes an implied warranty of merchantability (and, if otherwise applicable, an implied
®
shall not be liable for consequential, incidental or special damages resulting from or in any
®
© Copyright 2024 WILMAR LLC., P.O. Box 88259 Tukwila, WA 98138
1 YEAR WARRANTY
Figure 3
Figure 4
Figure 5
will replace at no charge any parts which
®
makes no
®
makes
®