Télécharger Imprimer la page
Les langues disponibles

Les langues disponibles

Liens rapides

H-7098
HEAVY DUTY WALL MOUNT
FAN – OSCILLATING
OPERATING ISSUE
Fan does not operate.
Insufficient airflow.
Excessive noise.
Excessive vibration.
Unit fails to oscillate.
PAGE 1 OF 3
1-800-295-5510
uline.com
TROUBLESHOOTING
CAUSES
Fan is not plugged in.
Blown fuse or tripped circuit breaker.
Defective on/off switch.
Defective motor.
Fan blade contacting housing.
Guards excessively dirty.
Blade and motor excessively dirty.
Fan blade contacting housing.
Defective motor bearings.
Loose guards.
Damaged fan blade.
Motor shaft is bent.
Motor is loose.
Connecting arm is not properly secured.
Defective gear assembly.
Para Español, vea página 2.
Pour le français, consulter la page 3.
RECOMMENDATIONS
Check power cord connection.
Replace fuse or reset circuit breaker.
Repair or replace switch.
Repair or replace motor.
Realign fan blade in fan housing.
Clean inlet and outlet guards.
Clean blade and motor.
Realign fan blade in fan housing.
Repair or replace motor.
Tighten guard fasteners.
Replace fan blade.
Repair or replace motor.
Realign if necessary and tighten
fasteners.
See Step 2 under Installing Fan on page
2 of the
instructions.
Replace gear box.
0525 TH-7098
loading

Sommaire des Matières pour Uline H-7098

  • Page 1 Para Español, vea página 2. Pour le français, consulter la page 3. H-7098 1-800-295-5510 uline.com HEAVY DUTY WALL MOUNT FAN – OSCILLATING TROUBLESHOOTING OPERATING ISSUE CAUSES RECOMMENDATIONS Fan does not operate. Fan is not plugged in. Check power cord connection.
  • Page 2 H-7098 800-295-5510 uline.mx VENTILADOR DE PARED PARA USO PESADO – OSCILANTE SOLUCIÓN DE PROBLEMAS PROBLEMA DE CAUSAS RECOMENDACIONES FUNCIONAMIENTO El ventilador no La unidad no está conectada. Verifique la conexión de cable. funciona. Reemplace el fusible o reinicie el Fusible fundido o se disparó el cortacircuito.
  • Page 3 H-7098 1 800 295-5510 uline.ca VENTILATEUR OSCILLANT ROBUSTE – FIXATION MURALE DÉPANNAGE PROBLÈME CAUSES RECOMMANDATIONS Le ventilateur ne Le ventilateur n'est pas branché. Vérifiez la connexion du cordon fonctionne pas. d'alimentation. Fusible grillé ou disjoncteur déclenché. Remplacez le fusible ou réactionnez le disjoncteur.