Important Safety Instructions; Initial Operation; Usb Ports - Oehlbach Powersocket 505 Mode D'emploi

IMPORTANT SAFETY INSTRUCTIONS:

This manual contains important information concerning operation and safety. It is imperative
you observe all of the information. Keep the manual in a safe place for future reference.
According to DIN VDE 0620 portable multiple socket outlets should not be
· connected in a row,
· operated under a cover,
· used as a substitute for fixed installations
- The Powersocket should only be connected to a mains socket which has the required connection values.
- The Powersocket should not be used if there is any liquid in or on the device.
- The Powersocket should not be used in areas where there is a very high degree of humidity.
- Do not touch or connect the mains cable with damp hands.
- Keep the Powersocket and mains cable away from heating appliances.
- The device should no longer be operated if there is visible damage to the Powersocket or mains cable.
- A damaged Powersocket should not be repaired, but replaced.
- No heavy objects should be placed on the Powersocket or the mains cable.
- The mains plug should be easily accessible at all times.
- If the devices that are connected to the Powersocket are not going to be used for a pronged period (e.g. while
on holiday), the Powersocket should be disconnected from the mains by removing the plug.
- Do not use any cleaning agents or chemical solvents when cleaning, as these could damage the surface.
- Repairs should always be conducted by qualified specialists, as you could be exposed to dangerous high voltage
levels or other hazards.
- During a thunderstorm we always recommend disconnecting the Powersocket from the mains.
Cleaning
Before cleaning the Powersocket disconnect the mains plug. The Powersocket should only be dusted. Do not use
any liquid cleaners or sprays.

Initial operation

Connect the supplied power cord to the Oehlbach Powersocket 505 and insert the mains plug into a wall outlet.
The multi-socket outlet can now be activated via the power switch.

USB ports

The Powersocket 505 is equipped with two USB ports, which can be used to charge multimedia devices (MP3 play-
ers, smartphones, etc.). The USB ports are only active when the Powersocket is switched on via the power switch.
POWERSOCKET 505
7