Publicité
Tools Required
①
Phillips Head Screwdriver
Parts Included
①
1x Set of Hooks
③
4x #10 x 1" Screw
Assembly Instructions
1
Referencing the dimensions below for your NeatTech size, transfer the hole pattern in the hooks
to the desired location on the underside of the work surface. Install the hooks with the arrows
pointing to the front of the desk. If using a work surface:
Less than .875" in thickness use the shorter screws (#10 x 5/8") provided
Greater than .875" in thickness use the longer screws (#10 x 1") provided
2
www.project-inrichting.nl
Small 510mm (20.08 in)
Mini 381mm (15 in)
info@witteveen.nl
②
1x Basket Assembly
④
4x #10 x 5/8" Screw
Large 650mm (25.6 in)
X2
www.ergonomics.nl
Publicité
