Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
ADEUNIS RF AMBIENT SENSOR - USER GUIDE - V1.1.1
4.2. Self-monitoring system
The Ambient Sensor monitors major events so as to ensure proper operation. It is especially intended to signal via the radio frames, a malfunc-
tion or a fraud.
You will find all information events such as the decryption information frames WMBUS and historical frames in the document entitled «APPLI-
CATION NOTE Decoding WMBUS_V1.1» available on our website :
ambient-sensor-amr
5. Technical datas
Standards
Type of sensor
Sensor type
Operating temperatures
Max storage conditions
Dimensions
Power supply
Operating life time
Display
Delivery
Operation
Tamper recognition
Failure detection
Measuring cycle
History
RF interface
RF Data Encryption
Radio Characteristics
Degree of protection
6. Revision Historic
Revision
V1.1.1
V1.1
V1.0
EN13757-4, EN300-220
NTC sensor with 0.5% accuracy in range 0 to 90°C
NTC sensor with an accuracy of :
0.5°C from 70° to 85°C
0.2°C from 0°C to 70°C
0.3°C from 0°C to -15°C
0.5°C from -15°C to -30°C
-30°C to +85°C (+105°C for remote sensor)
-25°C/60°C
High 78mm / Width 38mm / Thickness 30mm
3V0 – DC supply lithium battery
10 Years + reserve
6 digits LCD
Park mode (measuring and display not active)
Automatic start up 10 seconds after mounting on heat conductor
Mechanical seal + Electronic opening detection.
Sensors function, Low battery, Fraud tentative.
Each 4 minutes
Value of the latest 24 hours, transmitted every 12 hours
Wireless M-Bus protocol T1 mode according to EN13757-4
AES 128 Mode 5 (in option)
Power emission : up to 12 dBm
Frequency : 869 MHz
According to EN300-220
IP41
Changes
Update Declaration of conformity
Update Declaration of conformity
Creation
http://www.adeunis-rf.com/en/products/wireless-m-bus-amr/wireless-m-bus-
Page
16
of 16
Publicité
Table des Matières
