Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
ADEUNIS RF AMBIENT SENSOR - USER GUIDE - V1.1.1
4. Start of operation
Ambient Sensor starts operating automatically as soon as it is locked on its holder. LCD display is switching ON indicating: 888888, then starts
to display the temperature.
Note that the Ambient sensor can be removed from it's position till 1 hour after being started, without triggering the tamper detection signal.
During the first 6 hours operation a Wireless M-Bus telegram is sent every 60 seconds then the transmission occurrence is definitely locked on
standard time slot: Every 4 minutes.
4.1. LCD display
So as to preserve its 10 years autonomy, the Ambient Sensor does not display continuously measured temperature. The display occurs every 2
minutes.
Depending on the version used (compact or remote sensor), the display on the LCD temperature sensor can provide several types of information:
Product type
Integrated sensor, alternating display
Integrated sensor + remote sensor, alter-
nating display
Ambient sensor
mounted on holder
10 sec
24.5
Starts to measure
Status
Off during 1 min 30 sec
Integrated sensor measured T° during 30 sec
Off during 1 min 30
Integrated sensor measured T° during 15 sec
Remote sensor measured T° during 15 sec
LCD display example
20.5°
1
19.5°
2
-10.0°
Page
15
of 16
Publicité
Table des Matières
