Publicité
Before you assemble the Gazebo
•
Please don't destroy boxes until completely assembled.
•
Please verify the content of each box against the list of parts.
•
It is important that this gazebo be anchored on a solid base with the provided screws.
Otherwise, please ensure that you use anchors sufficient for your surface.
•
The gazebo should not be installed adjacent to trees or a sloped roof. Snow and ice may
slide onto the gazebo and cause it to collapse.
Tools Required (Not Provided)
•
6ft (1.8m) x2 Stepladder
•
Robinson #2 Screwdriver
•
Safety Gloves & Glasses
•
Phillips #2 Screwdriver
•
Ratchet SET
Step 1
A
1.Connect Corner Post Base Plate (B) to Corner Post (A) using Bolt (AA) and Steel washer (AA-1).
Repeat for all Corner Posts and Base Plates. Repeat for opposite side. Tighten all Bolts. See Figure 1.
•
Tarp or protective material for placing
parts on during assembly
•
Tape Measure
•
Leveling Shim
AA
AA-1
AA
Fig 1
31
A
AA-1
B
AA-1
Fig 1
AA
Publicité
