Télécharger Imprimer la page

Liens rapides

Task Seating
Installation Instructions
No Tools Required
Note: Do not remove styrofoam until you are ready
to install the seat back (A).
Nota: No quite la pieza de espuma de poliestireno
hasta que esté listo para instalar el respaldo (A).
Remarque : Ne pas enlever le polystyrène avant
d'être prêt à installer le dossier (A).
Hook
Silla de trabajo
Instrucciones de instalación
E.C.O. No: 259 - 001
SIT 10
Seat Back
Styrofoam
Back upright
1 OF 2
Page:
Chaise de bureau
Instructions d'installation
Z831/Z731/Z841/Z741
7021-8157
Part No:
Rev:
A
loading

Sommaire des Matières pour Haworth SIT 10

  • Page 1 SIT 10 Silla de trabajo Task Seating Chaise de bureau Instrucciones de instalación Installation Instructions Instructions d'installation No Tools Required Note: Do not remove styrofoam until you are ready to install the seat back (A). Nota: No quite la pieza de espuma de poliestireno hasta que esté...
  • Page 2 Quite la pieza de espuma de poliestireno (B) Enlever le polystyrène (B) Note: Verify that the mechanism is properly attached. If not, follow steps 2 through 4. Otherwise skip to step 5. Nota: Verifique que el mecanismo esté bien armado. Si no es así, siga los pasos 2 a 4.