Global Mode; Control Mode - Akai Professional Advance 49 Guide D'utilisation Rapide

Global Mode

Global Mode lets you set parameters and make changes to
Advance 49's general settings that are not specific to a preset.
• Use the Page Left/Right buttons to view each page of
settings.
• Use the Cursors to select the setting you want to edit.
• Use the Data Dial to change a value or setting.
Important: To retain your new settings for future sessions,
save them. To do this, use the Page Right button to move to
the right-most page, select Save Global Settings, and press
the Data Dial. Without saving, the settings will return to their
default settings once you power off your Advance 49.

Control Mode

Control Mode shows you the current settings of Advance 49's
controls in VIP. You can access this mode only when using
VIP.
Orange/yellow controls are assigned to parameters in VIP.
Green/aqua controls are assigned to MIDI CC messages,
which are sent to your DAW.
• Press the Control Mode Button to view each set of
controls (encoders, switches, and pads).
• Use the Page Left/Right buttons to view each bank of that
control type.
• Hold Shift and turn the Data Dial to select the desired channel within your multi.
• Use the Cursors to select a control. Alternatively, turn or press a control to select it directly.
• Press the Data Dial to enter Control Edit Mode.
Note: You can use Control Edit Mode
parameters (VST Param). This lets you control your plugin and your DAW in the same Control Mode page.
Control Edit Mode
Control Edit Mode lets you edit the parameters of your controls
(minimum values, maximum values, CC or note numbers, etc.)
for the current patch in VIP. You can access this mode only
when using VIP.
Orange/yellow controls are assigned to parameters in VIP.
Green/aqua controls are assigned to MIDI CC messages,
which are sent to your DAW.
Because VIP lets you control multiple patches, make sure you
have selected the one you want before making adjustments in
this mode.
• Press the Control Mode Button to view each set of controls (encoders, switches, and pads).
• Use the Page Left/Right buttons to view each bank of that control type.
• Use the Cursors to select the parameter you want to edit. Alternatively, turn or press a control to select
it directly.
• Turn the Data Dial to change a value or setting.
• Press the Data Dial to save your changes and return to the normal Control Mode (described above).
• Press and hold Shift and press the Data Dial to access Learn Mode, which lets you assign parameters
for the plugin or patch to VIP's encoders and switches, and assign chords or notes to VIP's pads.
Important: To edit parameters for the keybed, enter Global Mode instead.
to assign some knobs to MIDI CC messages instead of VST
11