Product Introduction - Ramili BTD100 Mode D'emploi

INSTRUCTION MANUAL
Bath Water Digital Thermometer
Ramili® BTD100 (Duck)
Please read instructions very carefully before using bath thermometer and keep them safe for future
reference.
The product has been designed to help you ensure that the water in your child's bath is at a safe and more
comfortable temperature. The thermometer works by measuring the water temperature every second,
and displays the temperature in Celsius degree on the centre of the LCD screen. The LCD also provides a
colour-coded light based guide on the measures.
Warnings
• Do not rely on this product as your primary and only means of checking and testing the bathwater
temperature.
• Always submerge your hand and forearm into the bathwater before placing your child in the bathwater.
• Never leave your child unsupervised.
• Always keep bathroom floors dry and clear of toys and other objects.
• Be sure to remove all packaging from the thermometer before use and/or before giving it to your child.

Product Introduction

• The thermometer is able to measure bath temperatures between 1-100°C. Do not expose this product
to extreme temperatures. Not recommended to put in water with temperature more than 60°C.
• The thermometer is fully submersible and floats naturally.
• The thermometer instantly activates in bathwater. Note, the thermometer is sensitive to moisture
and may remain powered on even when removed from the bathwater. It is recommend that the
thermometer is thoroughly dried after use. This will prolong battery life.
• The thermometer runs on 3 AAA batteries (included and pre-installed). Note, Please remove the
batteries if the product will be stored for a long period of time.
Operating Instructions
1. The thermometer automatically turns on when placed into the water. There is no On/Off button.
When activated, the thermometer provides a digital display of the bathwater temperature in degree
Celsius on LCD screen. The LCD screen also lights up in colour depending on the water temperature.
2. The LCD screen illuminates in Orange if the water temperature in the bath is less than 35°C. When the
LCD gives an Orange light it's indicating that the water temperature is Too Cold.
3. The LCD screen illuminates in Green if the water temperature in the bath ranges from 35°C to 39°C
(includes both). When the LCD gives a Green light, it's indicating that the water temperature is Just
Right.
4. The LCD screen illuminates in Red if the water temperature in the bath is greater than 39°C. When the
LCD gives a Red light, it's indicating that the water temperature is Too Hot.
5. Please do not expose the thermometer to extreme temperatures. If the thermometer's LCD screen
displays HH°C, it's indicating that the water temperature is extremely hot. If the LCD screen displays
LL°C, it's indicating that the water temperature is extremely cold.
6. After use, please remove the thermometer from the bath and dry it completely. Be sure to dry the
3-rounded water sensors located on the underside of the thermometer. Drying the thermometer's
sensors will ensure that the LCD turns off, there fore prolonging battery life.
7. When the LCD brightness begins to fade, the batteries are low on charge. Please replace the batteries
with new ones.
2
Ramili BTD100 (Duck)
®
EN