Publicité
15.Use caution when handling fuel. To avoid any accidental fires, move the
product at least 3 metres (10') from the fuelling point before starting the
engine.
16.Tighten the fuel cap thoroughly after refilling the fuel tank.
17.Do not operate the product if it is leaking fuel. Do not remove the fuel
tank cap while the engine is running.
18.Use only an approved container.
19.Do not store cans of fuel or refill the fuel tank in any place where there is
a boiler, stove, wood fire, electrical sparks, welding sparks, or other
sources of heat or fire which might ignite the fuel.
20.If any fuel spillage occurs during refueling, use a dry rag to wipe up
spills and allow remaining fuel to evaporate before turning the engine on
again.
21.If you have spilt fuel on yourself or on your clothes, change your clothes
and wash any part of your body that has come in contact with fuel before
turning the engine on again.
22.If fuel is ignited, put out the fire with a dry powder fire extinguisher.
23.If the fuel tank is drained, this should be done outdoors.
Vibration and noise reduction
To reduce the impact of noise and vibration emission, limit the time of
operation, use low-vibration and low-noise operating modes as well as
wear personal protective equipment.
Take the following points into account to minimize the vibration and noise
exposure risks:
1. Only use the product as intended by its design and these instructions.
2. Ensure that the product is in good condition and well-maintained.
3. Use correct attachments for the product and ensure they in good
condition.
4. Keep tight grip on the handles/gripping surface.
5. Maintain this product by these instructions and keep it well-lubricated
(where appropriate).
6. Plan your work schedule to spread any high vibration tool use across a
9
Publicité
